全國(guó)熱線服務(wù):
新聞資訊 Top label
- Motion Shafts: The Backbone of Modern Linear Motion Systems
- Precision Honed Tubes: The Backbone of Modern Hydraulic Systems
- Revolutionizing Building Maintenance: The Essential Guide to Modern Building Maintenance Units
- The Essential Guide to Hollow Shafts in Modern Mechanical Systems
- The Essential Guide to Cylinder Barrel Technology: Applications, Specifications, and Industry Standards
- The Complete Guide to Welded Ductwork: Industrial Applications and Technical Specifications
How to deal with the wall sticking phenomenon of honing pipes
When using a honing pipe, what you don’t want to see is the pipe wall sticking phenomenon. When this phenomenon occurs, the performance of the pipe will also be directly affected. We can only start with the causes and take appropriate measures to minimize the chance of the problem occurring.
In most cases, the wall sticking phenomenon is caused by the raw materials of the pipe. When curing agent is added to the raw materials, this problem will occur if the treatment is unreasonable. In the process of producing it, the quality of raw materials must be controlled and the selection standards must be strict.
Due to the balance of the honing tube operation, the wall sticking phenomenon may also occur. A common problem is improper control of temperature, process indicators, etc. during processing, resulting in uneven reaction progress. Strictly controlling each parameter in the process has become a principle to be followed.
Please indicate the source for reprinting:http://www.029zb.cn
In most cases, the wall sticking phenomenon is caused by the raw materials of the pipe. When curing agent is added to the raw materials, this problem will occur if the treatment is unreasonable. In the process of producing it, the quality of raw materials must be controlled and the selection standards must be strict.
Due to the balance of the honing tube operation, the wall sticking phenomenon may also occur. A common problem is improper control of temperature, process indicators, etc. during processing, resulting in uneven reaction progress. Strictly controlling each parameter in the process has become a principle to be followed.
Please indicate the source for reprinting:http://www.029zb.cn